High RPM Miniature BLDC Motors (12V-72V)

Description:

The advantages and uses of High rpm small miniature 12/24/48/72 volt BLDC motors are as follows:
(1)Advantages. Simple structure, low manufacturing cost, good reliability, wide speed range, high power density, good stability, and high control accuracy.
High efficiency: The efficiency of BLDC motors can generally reach over 80%, which is higher than traditional DC motors.
High torque: BLDC motors have high torque output and can provide sufficient power.
Low noise: Because BLDC motors are brushless, they have lower noise and are quieter than traditional DC motors.
Long lifespan: BLDC motors do not require brush replacement, therefore they have a longer lifespan. Meanwhile, due to brushless operation, the motor operates more smoothly.

(2)Purpose. miniature BLDC motor are most commonly used in fields such as drive drivers, machine tools, electric propulsion, robots, computer peripherals, and power generation

There are many technical parameters for small BLDC motor. Here are a few common technical parameters recommended for you:
1. Voltage. The voltage of  High rpm small miniature BLDC motors is usually 12V, 24V, 48V, 60V, 72V, 110V, etc.
2. Power. The power of  High rpm small miniature BLDC motors typically ranges from tens to hundreds of watts.
3. Speed. The speed of a  High rpm small miniature BLDC motor is usually between several thousand to tens of thousands of revolutions per minute.
4. Noise. The noise of  High rpm small miniature BLDC motors is usually low, less than about 50 decibels.
5. Service life.  High rpm small miniature BLDC motors typically have a longer lifespan, typically exceeding tens of thousands of hours.
6. Control method. The  High rpm small miniature BLDC motor can be controlled through a controller, including speed, direction, acceleration, etc.

The following chart shows the technical parameters of the high rpm small miniature 12/24/48/72 volt BLDC motor :

Details：